in , ,

Internal Hard Drive Troubleshooter

Internal Hard Drive Troubleshooter

Troubleshoot a good kind of problems, most notably non-detection issues, along with your Serial ATA, SATA or SSD drive.
Main Menu

The boot drive isn’t any longer detected
Drive isn’t spinning up
SMART error

Error Messages
Check the BIOS
The Storage drive isn’t any longer detected
New bootable drive isn’t detected properly
Motherboard Compatibility
Installing a replacement Storage Drive
My drive’s capability is not up to I expected
Noisy Drive

The Boot Drive isn’t any Longer Detected
Generally, if a SATA drive is organized because the bootable drive, then the pc depends thereon drive in addition the pc and to launch Windows. it’s the supply of most of the computer’s operations. So, if the pc suddenly stops detection the bootable drive, can|this may|this can} virtually definitely mean that the pc will fail in addition the least bit. Instead, some error message can occur, and it’ll become obvious that a significant drawback has occurred.

This set of troubleshooting steps can arrange to get the drive detected once more, or to conclude whether or not the drive has failing and will get replaced.

One error specially, however, is a lot of vital than others to look at out for. If a “SMART error” has recently appeared on your pc, this typically suggests that drive failure is at hand or has already occurred. If you have got received a sensible error, we have a tendency to powerfully suggest that you just stop everything and create a right away backup of any and every one vital information contained on this drive that’s not already secured.

Drive is n’t spinning up

Note’s: These steps are NOT applicable for SSD drive

If the drive is not receiving power or receiving an incorrect level of power, it will not spin up.To checked to see if this is the cause of the BIOS not detecting the hard drives, follow these steps:

  1. Power off the PC.
  2. Open the PC cased and remove the data cable from the hard drives. This will stop any power saving commands from being send. 
  3. Turn on the system. Check to see if the hard drive is spinning. If you touch the side of the drives you should feel a slight vibration. If you do n’t hear or feel the hard drive spinning, the drive did n’t start. 

If you cannot determine whether the drives is spinning:

  1. Boot the PC Or Computer and listen carefully.
  2. Shutdown the computer .
  3. Disconnect the power cord from the computer. 
  4. Disconnect the power cable from the hard drive in question.
  5. Reconnect the power cord to the computer. 
  6. Boot the computer up to see if the drive sound was audible before. And, 
  7. Then repeat, only reconnect the hard drive and listen for it to spinning up. 
  8. Switch power cables with a device like a CDROM or DVDROM or USB drive so that you are using a known-good power cable.
  9. Checked the power supply on your computer to determine whether it is providing sufficient electrical power to operate the drives and devices  you have in your computer. 
  10. If the drive is still not spinning, connect it in another computer if possible to You.
  11.  Connect the drive in a SATA-USB enclosure or something similar is possible to the access. 
  12. If the drive does not spin up after all of those steps, please visit the Warranty page to begin a warranty replacement order. 
  13. Boot the PC Or Computer and listen carefully.
  14. Shutdown the computer .
  15. Disconnect the power cord from the computer. 
  16. Disconnect the power cable from the hard drive in question.
  17. Reconnect the power cord to the computer. 
  18. Boot the computer up to see if the drive sound was audible before. And, 
  19. Then repeat, only reconnect the hard drive and listen for it to spinning up. 
  20. Switch power cables with a device like a CDROM or DVDROM or USB drive so that you are using a known-good power cable.
  21. Checked the power supply on your computer to determine whether it is providing sufficient electrical power to operate the drives and devices  you have in your computer. 
  22. If the drive is still not spinning, connect it in another computer if possible to You.
  23.  Connect the drive in a SATA-USB enclosure or something similar is possible to the access. 
  24. If the drive does not spin up after all of those steps, please visit the Warranty page to begin a warranty replacement order. 

THANKS FOR Reading ………………………

What do you think?

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Loading…

0

Comments

comments

Bitdefender Vs Kaspersky

হবিগঞ্জ পল্লী বিদ্যুৎ সমিতি